Side Frames to be Welded
Crawled side frames B7 class, to be welded directly on the central body. Suitable for
machines having a total weight up to 70 tons.Max speed 3 km/h, max output torque 100k Nm
ITR ; THE SIDE FRAMES DESIGNED BY ITR AVAILABLE FOR MACHINES WITH A TOTAL WEIGHT BETWEEN 500 KG AND 200 TONS.
The following categories may be identified for this class of undercarriage:
1. Side frames to be welded
2. Side frames with flanges
3. Side frames with pivot points
4. Side frames with cross beams
Side Frames with "Pivot Point"
Crawled side frames FL6 class, to be attached to the chassis through a pivot point. Suitable for machines having a total weight up to 32 tons. Max speed 2 km/h, max output torque 26k Nm.
The ITR side frames are all made using ITR components. The welded steel chassis are studied and designed for an optimal weight/resistance ratio. The side frames are characterised by their high reliability and flexibility on any kind of terrain. These frames are typically used for crushers, small drilling machines, conveyors, road pavers, milling machines. Some examples are listed here below.
Side Frames with Cross Beams
Crawled side frames B6 class, with welded or bolted cross beams, designed and produced for the assembling of the upper part of the machine. Suitable for machines having a total weight up to 50 tons. Max speed 3 km/h, max output torque 85 kNm.
These Side Frames are supplied complete with base bearing (slewing ring), rotating distributor joint and hydraulic pipes ready for assembly on the customer's machine. Accessories can also be supplied on request, such as hydraulicallycontrolled
buckets, hydraulic and mechanical stabilisers or other components.